BBI Question

[XOC2008]

Maybe I'm dumb and missed it somewhere, but how does one:

A) Remove the plastic plugs from the screw holes so that they can
B) Disassemble any number of the BBI Helos?

 

[G.I.*EDDIE]

the best way i found was to tap an edge with a small flat tip and they (should) turn sideways and then you could grab them with small needle noses...

they may also have a smidge glue

 

[pcsguy88]

I've also heard of drilling a small hole in the plug and pulling it out with am L shaped wire. Obviously this only works if you are painting it and don't mind a dab of putty work.

 

[K-Tiger]

That's the only effective way i've found to do it.