Dropshipbob, you are right. That's the spinner that comes with the Japanese blu-ray. It's supposed to be 1:18. The width and length are right, but I think it looks a hair short on the height. It is plain on the inside, so I painted a little, drew up some decals on the PC, printed them and ran them through a Xyron sticker maker. Of course I had to take it apart to get them in. The seats are a tad far forward, so smaller frame figures will fit, but it takes a bit of work and patience. A guy named Dayton Allen put a video on youtube long ago showing his first steps to making it easier for figures to fit in, but he hasn't updated any. I think it's a good vehicle. The doors open, the front wheel pods open, and you pull the wheels out and then extend them down to make contact with the ground. It can use some improvement inside, but I just did a quick fix. Like I said, the seats should go back just a little and that requires some shop work, but I think it would be worth it. Unfortunately, the lights don't work. One of my kiddos thought it would be a neat effect to shine a laser pointer into one of the reds while I took the shot.