Search results

I like how you added the rivets to the FLIR :):):)

I will take everything that is left :)

Try a ball of masking tape rolled in your fingers with the sticky side out. The hot glue and CA may adhere to the head and you will not be able to turn it to pose. The ball will keep the head floating high and should be just enough tack to hold it in place.

I can't take credit for them. They are my kits but my buddy Robbie is the master modeler.:cool::)

To tell you the truth I have never put a tape measure on the FOV Sherman. It is a good start for customs. I have compared and used a tape on the 21st and FOV Tiger . Both had hits and misses. The one thing that is a negative with the FOV Sherman is that most of the gear is cast onto...

Here is the build of the main parts. http://www.warbird-photos.com/gpxd/viewtopic.php?f=1&t=15176&hilit=pavehawk+fuel+probe here is the window build http://www.warbird-photos.com/gpxd/viewtopic.php?f=1&t=18947&hilit=pavehawk+window Here is the kit on the Pavehawk

The wash has brought it to life :)

She is a beauty !!

Slowly but surely I have started on some new Pavey parts. Here are the nose sensors. I may get done with the vertical tail sensors tomorrow. Then I need to get back on my back orders. I intend to do the full DAP ( ? ) version but in time

Cool thanks for the info :)

It is cool looking. The water tank on the bumper. Was that to replace the radiator or extra cooling liquid for the engine ? Did all the desert jeeps have them ? I am not knowledgeable of SAS operation vehicles. Good job.:)

Sanding and filling is the name of the game for resin parts. I would say small to medium amount of work for the ppsh's. The parts are not big. The gun and mag is what you get. I would say about a 10-15 mins worth of work for your first prime coat . You may have to do it twice.

Yes the ppsh-41 $2 each . They come in white resin.

I am not making them. A Small Scale board member is making them. Weylen has some serious skills . Talk about a talent.:) Check out his link I posted. He also makes FJ and American motorcyle riders !!!! I also make the tankers helmets and the Russian steel helmets. With static...

You just have to know were to look. These are being made to fit my 1/18 scale T-34 Here is the post. http://www.warbird-photos.com/gpxd/viewtopic.php?f=9&t=23951 I also make the ppsh-41 in 1/18 scale . But that may be a little small in 1/16 scale.

$250-$300 FOR A KIT $400-$450 FOR A FULL BUILD.

More progess pics

OK Guys, I am kind of close on starting my next HUMVEE project. I will be doing the new turret. What other parts would you guys like to see ? These I intend to make. Maybe without the little bumper pads. Potential new turret. Old reliable

I hope to be done with it in about 2weeks :) Here is one of the latest pics. This is the coolest pic of all of the original H0 229 I wonder if this started all of the flying saucer sightings ? it was taken as the middle section was being uncrated in Indiana after the war.

Pretty close .