Merit 1/16th M-ATV

tflenno

Active member
Oct 16, 2020
205
150
43
Although it's marked 1:16 scale, I think it's more like 1:18 scale after I compare its size with the real vehicle data. What do you folk think?
尺寸_MATV-engineer.pngIMG_6653.jpgIMG_6657.jpgIMG_6656.jpgIMG_6666.jpg
IMG_6670.jpgIMG_6664.jpgIMG_6667.jpgIMG_6673.jpgIMG_6674.jpg
 
  • Like
Reactions: Sgt301

Pickelhaube

Replicator of Toys
Officer Club
Mar 15, 2011
1,599
123
63
64
New Orleans
I deal with scale all of the time.
I f you break down the parts and start measuring the difference in 1/18- 1/16 is slight.
But when you put the parts together the size becomes apparent.
A 1/16 scale Tiger II track is 3/16 of an inch bigger than it's 1/18 counter .
A pencil lead is about 1/8th of an inch and the T-II track is 1/16th of an inch bigger.

Here is a 1-1 can you make a mock up to match ?

 
  • Like
Reactions: tflenno

Pickelhaube

Replicator of Toys
Officer Club
Mar 15, 2011
1,599
123
63
64
New Orleans
If the vehicle is 98.1 inches wide , it would be 6.13 in 1/16 ---- 5.45 in 1/18------Wide
The height is 104.5 right under the turret so --6.53 in 1/16-----------5.80 in 1/18-- Tall

Almost 3/4 of and inch bigger both ways.
 

pcsguy88

Deuce Deuce
Staff member
Mar 14, 2011
12,421
635
113
KC
www.fighting118th.com
We did a lot of size comparisons in the build thread. The body is not sitting down all the way in the front here, but you can tell it’s about a 1/4” too tall.

1604268143686.jpeg
 

NSA

Brotherhood
Admin
Mar 13, 2011
28,540
920
113
Southern California
www.fighting118th.com
It's always a crapshoot with scale, because true 1:18 tends not to work with figures because 1:18 figures do not bend and contort like real humans do, so it's best to have some 'give' room. Obviously not great if you're super picky about scale, but I was surprised how well it looks.

I am still amazed how big the M-ATV and MRAP are in real life.