Modern Copperhead v2

XOC2008

Caution: Troll Ahead!
Mar 14, 2011
4,690
3
0
50
Plainfield, IL
I know I did this once before, but I wasn't really pleased with how it turned out. With the Wave "3.5" Ultimate Roadblock, I decided to give it another go. The paint is unchanged, I felt it worked as-is for what I envisioned. So, here's Copperhead, the pilot for the Cobra Cottonmouth.

Parts list:

Torso, Arms, Legs, Ankle Knife and Sheath - Retaliation Wave 3.5 Ultimate Roadblock
Feet - POC/30th IG
Head, Belt, Pouch(left leg) - Random 25th and ROC Copperheads
Holster - Raginspoon cast
Vest - Modded Crossbones with Working Knife and Sheath(Can't remember where the sheath is from but the knife is POC Ultimate SE, etc.)
Guns - Marauder "Desert Eagle" and BBI M4 with Grenade Launcher

(I know there's a difference in flesh color between the arms and the face, but it doesn't bother me because I figure that the helmet blocks a lot of sun so he's not going to have as much color in his face.)







C&C Welcome!
 

Attachments

  • Copperheadv2-1.jpg
    Copperheadv2-1.jpg
    90.8 KB · Views: 132
  • Copperheadv2-2.jpg
    Copperheadv2-2.jpg
    85.9 KB · Views: 2
  • Copperheadv2-3.jpg
    Copperheadv2-3.jpg
    87.9 KB · Views: 1
  • Copperheadv2-4.jpg
    Copperheadv2-4.jpg
    87.5 KB · Views: 2
  • Copperheadv2-5.jpg
    Copperheadv2-5.jpg
    88.1 KB · Views: 2
  • Copperheadv2-6.jpg
    Copperheadv2-6.jpg
    87.5 KB · Views: 123
  • Copperheadv2-7.jpg
    Copperheadv2-7.jpg
    86.8 KB · Views: 2
  • Copperheadv2-8.jpg
    Copperheadv2-8.jpg
    86.1 KB · Views: 124
Last edited:

Obi-Shinobi

Pioneer, Damn It!
Apr 6, 2011
2,370
16
38
55
York, PA
Looks great. Shame you couldn't update that helmet with something... it has the old tiny, squished head underneath look.

Still, great update all-around.
 

Slaymaker

Mostly Ignored
Officer Club
May 13, 2011
2,777
64
48
53
Iowa
very nice! If I ever find wave 3.5 I may have to copy some of your ideas!
 

XOC2008

Caution: Troll Ahead!
Mar 14, 2011
4,690
3
0
50
Plainfield, IL
Looks great. Shame you couldn't update that helmet with something... it has the old tiny, squished head underneath look.

Still, great update all-around.

Yes! I'd like to have it scaled up a bit and hollowed out to use as just a helmet, OR find/sculpt an updated one. Thing is.. I really don't know what the hell it's based off of! It's like.. half scuba helmet and half flight helmet.

And thanks, guys! It's about time I started trying to finish up some of these half finished ideas.
 

Obi-Shinobi

Pioneer, Damn It!
Apr 6, 2011
2,370
16
38
55
York, PA
You could always go with something more "real-world" as a replacement helmet. What about the new Cobra Combat Ninja helmet? First thing that came to mind...

I have a few that I won't be using, if you decide on that and need one.
 

G.I.*EDDIE

gobbles a LOT of cock
Founder
Mar 14, 2011
43,432
429
83
S.E. Mich :(
If X is anything like me, he'd want to keep to the helmet to be clearly identified as CH...replace it and he becomes kinda generic...
 

XOC2008

Caution: Troll Ahead!
Mar 14, 2011
4,690
3
0
50
Plainfield, IL
You could always go with something more "real-world" as a replacement helmet. What about the new Cobra Combat Ninja helmet? First thing that came to mind...

I have a few that I won't be using, if you decide on that and need one.

Hmm, not a terrible idea actually. Then all I'd need is a suitable head to go underneath it. I think I shall take you up on that offer. Any ideas for the accompanying head?

If X is anything like me, he'd want to keep to the helmet to be clearly identified as CH...replace it and he becomes kinda generic...

Yes, but I think I can adapt the CCN helmet with a scuba regulator piece to look close to an updated-but-recognizable-Copperhead.
 

K-Tiger

All solutions are final.
Founder
Mar 14, 2011
31,266
190
63
Meh, give him a motocross helmet and modify it with a hose that connects to a Spare Air. If you must you can sculpt the silly little air scoops/lights/whatever the hell they are, on the sides.




:D
 

Obi-Shinobi

Pioneer, Damn It!
Apr 6, 2011
2,370
16
38
55
York, PA
Hmm, not a terrible idea actually. Then all I'd need is a suitable head to go underneath it. I think I shall take you up on that offer. Any ideas for the accompanying head?



Yes, but I think I can adapt the CCN helmet with a scuba regulator piece to look close to an updated-but-recognizable-Copperhead.

See... that's what I was thinking too. Some kind of mouth piece on the front of the CCN helmet, covering that opening it has. Maybe even the face-mask from one of those Renegades RC helmets? Just a thought.

What head? Does it matter with the helmet on? Heck, I'd go with the CCN head while you're at it. I can send you one of those too. It's small by itself, but with the helmet it would be fine.

Edit: Actually... let me work up a head/helmet combo for you, and see if you like it.
 

XOC2008

Caution: Troll Ahead!
Mar 14, 2011
4,690
3
0
50
Plainfield, IL
See... that's what I was thinking too. Some kind of mouth piece on the front of the CCN helmet, covering that opening it has. Maybe even the face-mask from one of those Renegades RC helmets? Just a thought.

What head? Does it matter with the helmet on? Heck, I'd go with the CCN head while you're at it. I can send you one of those too. It's small by itself, but with the helmet it would be fine.

Edit: Actually... let me work up a head/helmet combo for you, and see if you like it.

Alright. I'll be waiting as patiently as I can. Which is not very. ;)
 

XOC2008

Caution: Troll Ahead!
Mar 14, 2011
4,690
3
0
50
Plainfield, IL
Man, I can't wait to see what you come up with, Obi. I tried various combinations yesterday and I couldn't find a damn thing that worked.
 

XOC2008

Caution: Troll Ahead!
Mar 14, 2011
4,690
3
0
50
Plainfield, IL
Like we talked about over text.. subtlety is best. The vents will give some Copperhead feel but small ones won't push it into the realm of ridiculousness.

Again, I appreciate this and will be looking forward to more updates. Can't wait to drop this sucker onto Copperhead!
 

XOC2008

Caution: Troll Ahead!
Mar 14, 2011
4,690
3
0
50
Plainfield, IL
Nice!...can't say it instantly emotes a CH vibe, but it's bada$$ nonetheless :thumbsup:

I think it does, you just have to view it differently. You're looking at it expecting to see clear indicators that it's Copperhead, and they're simply too subtle. But if you look at it as a whole, all the subtle elements draw nice parallels to CH without being 'the same old thing'. And since ole CH got a big update from me, I think the head works perfectly. :D

:thumbsup:
 

XOC2008

Caution: Troll Ahead!
Mar 14, 2011
4,690
3
0
50
Plainfield, IL
Update. Head by Obi-Shinobi:









I just gotta reach in there and give him irises/pupils.
 

Attachments

  • Copperheadv2-9.jpg
    Copperheadv2-9.jpg
    85.3 KB · Views: 2
  • Copperheadv2-10.jpg
    Copperheadv2-10.jpg
    81 KB · Views: 19
  • Copperheadv2-11.jpg
    Copperheadv2-11.jpg
    73.4 KB · Views: 19
  • Copperheadv2-12.jpg
    Copperheadv2-12.jpg
    78.9 KB · Views: 19
  • Copperheadv2-13.jpg
    Copperheadv2-13.jpg
    72.2 KB · Views: 18
  • Copperheadv2-14.jpg
    Copperheadv2-14.jpg
    52.9 KB · Views: 3
  • Copperheadv2-15.jpg
    Copperheadv2-15.jpg
    83.3 KB · Views: 5